Top 20 Best Refrigerant To Water Heat Exchanger Test, Reviews & Comparison

Have you been looking for the best refrigerant to water heat exchanger in your market? Before buying, spend some of that valuable time doing research, and if confused about where to start then don’t worry because we have got this!

If you’re looking for the best refrigerant to water heat exchanger of 2022, we’ve got your back. We rated 16874 reviews from top experts and these are our favorite picks on their list:

Bestseller No. 1
Duda Energy HX1220:M34 B3-12A 20 Plate Stainless Steel Heat Exchanger with 3/4" Male NPT Ports Copper Brazed, 2" Height, 2.9" Width, 7.5" Length
  • Length: 7.5'', width: 2.9'', height: 2'', heat exchange area: 2.58Ft², with m5-0.8 mounting studs
  • Refrigeration capacity: 3400 - 17000 BTU/hour, design pressure: 145 psi, test pressure: 290 psi
  • Design temperature:-319°f to 430°f,304 stainless steel inner plates brazed with 99.9+ percent Pure copper
  • For refrigerants, water, oil, light alkali/acid, fuel, antifreeze, air & most liquids/fluids
  • Corrosion resistant, UL Listed, CE, ISO 9001:2008, tuvreinland ISO9001:2000
Bestseller No. 2
BestEquip Heat Exchanger 3"x7.5" 60 Plates Brazed Plate Heat Exchanger 316L 1/2" BSP FPT Heat Exchanger EATB12 Beer Wort Chiller for Hydronic Heating
  • High Thermal Efficiency: Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE.
  • Energy Optimized: This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption.
  • Robust Construction: This 60 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened BSP FPT ports for your easier installation.
  • Compact Design: Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings.
  • Highly Versatile: This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact &lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and condensers, residential and light commercial HVAC hydronic systems.
Bestseller No. 3
Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5" x 1.97")
  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange.
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours.
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage.
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the wort to prevent clogging of the wort chiller. Cannot be used for viscous liquids.
Bestseller No. 4
AB Plate Heat Exchanger, 3"x8" 20 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting
  • 【Premium Quality】Our plate heat exchanger is UL listed and it is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature.
  • 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption.
  • 【Product Parameter】130,000 - 180,000 BTU CAPACITY: Depending on the application, this product can produce 130kBtu to 180kBtu per hour. 20 PLATES; 3"x8", 3/4" MPT: 20 brazed plates work to efficiently heat water for your application.
  • 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler.
  • 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufacturer defects. And we provide 100% satisfaction service as well as best premium quality product, if you have any problem about the product, please contact us freely.
Bestseller No. 5
Duda Energy HX3660:M075 B3-36A 60 Plate Stainless Steel Heat Exchanger with 3/4" Male NPT Ports Copper Brazed, 5.9" Height, 2.9" Width, 18.3" Length
  • Length: 18.3'', width: 2.9'', height: 5.9'', heat exchange area: 23.25Ft², with m8-1.25 mounting studs
  • Refrigeration capacity: 17000 - 85000 BTU/hour, design pressure: 435 psi, test pressure: 650 psi
  • Design temperature:-319°f to 430°f,304 stainless steel inner plates brazed with 99.9+ percent Pure copper
  • For refrigerants, water, oil, light alkali/acid, fuel, antifreeze, air & most liquids/fluids
  • Corrosion resistant, UL Listed, CE, ISO 9001:2008, tuvreinland ISO9001:2000
Bestseller No. 6
Duda Energy HX1230:M34 B3-12A 30 Plate Stainless Steel Heat Exchanger with 3/4" Male NPT Ports Copper Brazed, 2.9" Height, 2.9" Width, 7.5" Length
  • Length: 7.5'', width: 2.9'', height: 2.9'', heat exchange area: 3.88Ft², with m5-0.8 mounting studs
  • Refrigeration capacity: 3400 - 17000 BTU/hour, design pressure: 145 psi, test pressure: 290 psi
  • Design temperature:-319°f to 430°f,304 stainless steel inner plates brazed with 99.9+ percent Pure copper
  • For refrigerants, water, oil, light alkali/acid, fuel, antifreeze, air & most liquids/fluids
  • Corrosion resistant, UL Listed, CE, ISO 9001:2008, tuvreinland ISO9001:2000
Bestseller No. 7
AB Plate Heat Exchanger, 4"x 12" 20 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting
  • 【Premium Quality】Our plate heat exchanger is UL listed and it is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature.
  • 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption.
  • 【Product Parameter】250000 BTU CAPACITY: Depending on the application, this product can produce up to 250kBtu per hour. 20 PLATES; 4"x 12", 1" MPT: 20 brazed plates work to efficiently heat water for your application.
  • 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler.
  • 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufacturer defects. And we provide 100% satisfaction service as well as best premium quality product, if you have any problem about the product, please contact us freely.
SaleBestseller No. 8
Ecosmart ECO Electric Tankless Water Heater, 27 KW at 240 Volts, 112.5 Amps with Patented Self Modulating Technology, White
  • Endless on-Demand Hot Water; Consistent hot water when you need it that never runs out; Continuously monitored water temperature and controlled flow rates ensure efficiency and consistent performance within 1 degree of selected temperature
  • Save Space; EcoSmart tankless electric water heaters are 90% smaller than traditional tank heaters; may be installed on wall or at point of use; Dimensions 17 x 17 x 3.75 inches 
  • Save Energy; EcoSmart tankless electric water heaters are 99% thermal energy efficient; Only heats water when called unlike a tank heater that maintains water temperature even when not being used. Save up to 50% in water heating costs according to the Department of Energy
  • EcoSmart ECO 27 Sizing; Refer to the sizing map. Requires 3x40 AMP Double Pole Breaker, 27-kilowatt tankless electric water heater ideal for providing hot water for whole home applications; provides between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature; refer to the sizing guide to select the proper solution
  • Warranty and Certifications; Limited Lifetime Warranty on electronics, exchanger and element; UL-499 certified; ETL Listed
Bestseller No. 9
10-plate Brazed Plate Heat Exchanger, 316L Stainless Steel, Copper Brazed, 1" MNPT, up to 150,000 BTU/hr for use with Outdoor Wood Boilers, Domestic Hot Water Heating
  • Unit Dimensions: 4-1/4"x12" - 10 plates, 1" MNPT ports. BTU Output: up to 150,000 BTU/hr
  • 316L Stainless Steel Brazed Plate Heat Exchanger - Copper Brazed - Flow Rate: up to 30 GPM (max)
  • Outdoor wood furnace and wood boiler heating
  • Water-to-Water heating and cooling applications
  • Domestic hot water heating applications
Bestseller No. 10
FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3" x 2.8"
  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange.
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours.
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage.
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the wort to prevent clogging of the wort chiller. Cannot be used for viscous liquids.

Take These Factors Into Consideration Before Purchasing Your Refrigerant To Water Heat Exchanger

It’s a well-known fact that before making any purchase, we like to gather as much information about it from others who have already purchased or used the product. This is because word of mouth recommendations tend to be more accurate than those given by just one person and can give you an idea on whether something will work for your needs too!

So, you’re wondering if the refrigerant to water heat exchanger is worth buying? Well don’t worry; there are plenty of online platforms where this product can be purchased. Just open your browser and type in refrigerant to water heat exchanger followed by any keywords related to what it’s for- we found some great ones that will suit all needs!

While reviews are a great place to start, you should also consider other factors when researching your potential purchase. You should also get the answers to few questions first:

  • How much are you willing to pay for refrigerant to water heat exchanger?
  • Will the refrigerant to water heat exchanger be worth buying?
  • Which are the refrigerant to water heat exchanger available in the market?
  • What are the things you need to check before buying the refrigerant to water heat exchanger?
  • What will be the way or medium (online or physical store) for buying the refrigerant to water heat exchanger?
  • What are the advantages of purchasing the refrigerant to water heat exchanger?

The more information that is available, the better! That’s why we recommend gathering as much knowledge about this subject by looking into other products or researching online so your purchase goes smoothly and without any fuss later on down the road.

How To Select The Refrigerant To Water Heat Exchanger

Picking out the perfect refrigerant to water heat exchanger can be difficult for beginners, but we’re here to help! Consider these factors when choosing your product:

  • Price
  • Brand
  • Function
  • Customer Reviews

It’s always good to have an idea about the product before you buy it.

Advantages Of Buying Refrigerant To Water Heat Exchanger From Online Platforms

Online shopping is easier than ever before now with websites like Amazon which offer quick delivery times for your purchases. If this sounds good to you then read on! We’ll go over some reasons why people buy things online as well as what benefits they enjoy from doing so – along with examples too. 

Getting the Best Deals

When you buy from the comfort of your own home, there are many benefits that come along with it. You can save money on shipping fees by ordering online and avoiding any unnecessary taxes too.

Getting a Wide Range of Selection

With a click of your mouse, you can find anything from the latest fashion trends to that hard-to-find item no one else seems to have.

Saving Time

You can order anything anytime without waiting in lines or asking for help from shop assistants and save both time and physical hardships! Plus no more carrying heavy bags all over town – you just enter your shipping info once at home and then wait for it to show up on your doorstep (or desk).

FAQs about Best Refrigerant To Water Heat Exchanger

Which Refrigerant To Water Heat Exchanger Quality is the Best?

There is no definitive answer when it comes to quality, as it can vary depending on your needs and preferences. However, some products are known for being more durable and long-lasting than others. So if you’re looking for a high-quality option that will last for years, you may want to consider investing in a product that is built to last.

How To Preserve And Prolong The Life Of The Refrigerant To Water Heat Exchanger?

There are a few things you can do to help preserve and prolong the life of your refrigerant to water heat exchanger. First, make sure to keep it in a cool, dry place when not in use. You can also clean it on occasion. If it starts to show any signs of wear and tear, you can replace the coverings or parts as needed. Finally, avoid exposing it to direct sunlight or extreme temperatures, as this can damage the product. By following these simple tips, you can help keep your product in good condition for years to come.

Why Warranties are Important to E-commerce Customers? 

When it comes to choosing a refrigerant to water heat exchanger, customer service and warranty can be important factors to consider. If something goes wrong with your product, you’ll want to be able to easily get in touch with customer service and have the issue resolved. And if the product has a warranty, you’ll be able to get it repaired or replaced at no cost to you if something does happen to go wrong. So if customer service and warranty are important to you, be sure to look for a product that offers both.

Best Time to Buy Refrigerant To Water Heat Exchanger on E-commerce Marketplace?

The best time to buy is typical during the holidays when retailers offer various discounts and deals. However, you can also find good deals throughout the year, so be sure to check regularly for updates. You can also sign up for a membership account, which gives you access to exclusive deals and free shipping on many items. So if you’re looking for the best possible deal, be sure to keep an eye out for sales and specials.

Bottom Line

We all know how expensive it is to buy things, so before you go out and spend your hard-earned money on anything make sure that there’s a need for such an acquisition. It may seem like common sense but we often don’t realize what value our items have until they’re gone–reviewing whether or not this purchase will really serve any purpose can help save unnecessary expense in future purchases.

A couple of messages from our team:

  • Your search for the best refrigerant to water heat exchanger ends here. We make use of Big Data and AI data to compile this list so it is highly accurate!
  • We spent hours reading reviews and looking at what buyers think about each product so that your buying experience will be satisfying!
  • Visit our site now and take advantage of all the benefits we have in store for you!

 

Leave a Comment